Configuring the MortiSafe Pro wifi connection: Difference between revisions

From MortiSafePro
Jump to navigation Jump to search
(Created page with " WICD prefs - general - add wireless interface name o2 - rightarrow - change auth to WEP (hex)")
 
No edit summary
Line 1: Line 1:
You'll need to do one-off configuration, for which you'll need to plug some bits into your core unit.
* If you have a monitor which takes an HDMI connection, run a cable from the monitor to the core unit - there's a socket next to the USB power socket. If not, plug a standard VGA connector into an VGA-to-HDMI connector and plug that into the core unit. Then plug a USB keyboard into one of the USB sockets.
* You should see a login prompt. Enter "wifi" and hit return
* It will show a list of all the wifi servers, which should be your own and probably some of your neighbors
*


WICD
WICD

Revision as of 18:26, 15 February 2015

You'll need to do one-off configuration, for which you'll need to plug some bits into your core unit.

  • If you have a monitor which takes an HDMI connection, run a cable from the monitor to the core unit - there's a socket next to the USB power socket. If not, plug a standard VGA connector into an VGA-to-HDMI connector and plug that into the core unit. Then plug a USB keyboard into one of the USB sockets.
  • You should see a login prompt. Enter "wifi" and hit return
  • It will show a list of all the wifi servers, which should be your own and probably some of your neighbors

WICD prefs - general - add wireless interface name o2 - rightarrow - change auth to WEP (hex)