View source for What if I have some parts already?

If you's like to buy a MortiSafe Pro and have some of the parts already, get in touch about buying the other bits from me.

* The MortiSafe Pro core unit is a Raspberry Pi B+ - if you have an A, and A+ or a B then it's not suitable. I've not yet tried a Pi 2 but would expect it to work just as well as a B+.

* I've tested it with a particular wifi unit, chosen because it scores well on the compatibility list and has an aerial so should get a better signal inside the safe than the micro-wifi units. However, you can try with your own if you have one.

* The relay unit is specific to the software (the relays are on specific GPIO pins) so unlikely to work with a different relay unit.