Build your own from parts: Difference between revisions

Revision as of 20:59, 15 February 2015

You can build your own MortiSafe from parts.

You will need to buy the parts listed on Parts you'll need.

You'll need a home wifi system and know the password to join a new appliance to it (the same as you would with a phone or laptop).

You'll need the something to cut a wire and clean the insulation off the end of it, such as a penknife.

There may look like a lot of steps to building the MortiSafe Pro but that's only because it's in a lot of detail. The basic steps to it are:

Cut a wire in your digital safe and connect it to the MortiSafe Pro core unit
Thread the power cable through the safe
Plug the parts together
Connect to a monitor/keyboard and grant the MortiSafe Pro core unit access to your wifi
Use it

Follow these links to build your MortiSafe Pro:

@@ Line 7: / Line 7: @@
 You'll need a home wifi system and know the password to join a new appliance to it (the same as you would with a phone or laptop).
-You'll need the something to cut a wire and clean the insulation off the end of it.
+You'll need the something to cut a wire and clean the insulation off the end of it, such as a penknife.
 ===How to build, quick summary===