Configuring the MortiSafe Pro wifi connection: Difference between revisions
Jump to navigation
Jump to search
(Created page with " WICD prefs - general - add wireless interface name o2 - rightarrow - change auth to WEP (hex)") |
No edit summary |
||
| Line 1: | Line 1: | ||
You'll need to do one-off configuration, for which you'll need to plug some bits into your core unit. | |||
* If you have a monitor which takes an HDMI connection, run a cable from the monitor to the core unit - there's a socket next to the USB power socket. If not, plug a standard VGA connector into an VGA-to-HDMI connector and plug that into the core unit. Then plug a USB keyboard into one of the USB sockets. | |||
* You should see a login prompt. Enter "wifi" and hit return | |||
* It will show a list of all the wifi servers, which should be your own and probably some of your neighbors | |||
* | |||
WICD | WICD | ||
Revision as of 18:26, 15 February 2015
You'll need to do one-off configuration, for which you'll need to plug some bits into your core unit.
- If you have a monitor which takes an HDMI connection, run a cable from the monitor to the core unit - there's a socket next to the USB power socket. If not, plug a standard VGA connector into an VGA-to-HDMI connector and plug that into the core unit. Then plug a USB keyboard into one of the USB sockets.
- You should see a login prompt. Enter "wifi" and hit return
- It will show a list of all the wifi servers, which should be your own and probably some of your neighbors
WICD prefs - general - add wireless interface name o2 - rightarrow - change auth to WEP (hex)