Build your own from parts

You can build your own MortiSafe from parts.

Before you start

You will need to buy the parts listed on Parts you'll need.

You'll need a home wifi system and know the password to join a new appliance to it (the same as you would with a phone or laptop).

You'll need the something to cut a wire and clean the insulation off the end of it.

How to build, quick summary

There may look like a lot of steps to building the MortiSafe Pro but that's only because it's in a lot of detail. The basic steps to it are:

• Cut a wire in your digital safe and connect it to the MortiSafe Pro core unit
• Thread the power cable through the safe
• Plug the parts together
• Connect to a monitor/keyboard and grant the MortiSafe Pro core unit access to your wifi
• Use it

How to build, detailed instructions

Follow these links to build your MortiSafe Pro:

• Familiarizing yourself with your digital safe
• Checking the MortiSafe Pro core unit
• Threading the power cable through the digital safe
• Wiring the digital safe to the MortiSafe Pro core unit wiring
• Configuring the MortiSafe Pro wifi connection
• Testing and using

Uninstalling the MortiSafe

If you should want to, you can very easily turn the MortiSafe back into a normal digital safe just by unscrewing some wires:

• Open the safe, and unscrew the panel on the back of the door
• Identify the screw terminal block which has two wires going to the MortiReceiver and two going to the safe
• Unscrew the wires going to the MortiReceiver
• Unscrew one of the wires going to the safe
• Screw that wire back in so that both of the wires going to the safe are connected together

The safe is now restored to normal.